 |
|
The blood electrifier function delivers to the user a low voltage alternating current (AC) output (at a selectable frequency of 4 or 40 hertz), pure square wave, low current signal. Typical current usage, just below being able to feel it, is around .13 milliamps which is very safe. The amount of current is adjustable by the control knob. |
The Candida Zapper function delivers a positive offset pulsed DC output (at a selectable 30,000 hertz or 464 hertz), pure square wave, low current signal. Typical current usage is around .06 milliamps (avg.) which is very safe. The output is not buffered by a resistor which allows the waveform to retain its squareness which increases its effectiveness. Peak voltage is 10 volts which is higher than most other Clark Zappers which increases its effectiveness. Output electrodes are 3" square cloth which need to be moistened with tap water before each use. Output cable terminates with alligator clips to connect to the cloth electrodes or to 3/4" copper tubing. |
| INDICATOR LIGHTS Red power light indicates the batteries have sufficient voltage. Green Output lights indicate when electrical current is flowing through the user. POWER Four 9 volt batteries supply circuit power. |
| Click here for usage instructions. |
